Conair Carousel Plus UGD043-1216, Руководство пользователя

Страница: 155 / 176

Tr o u b l e s h o o t i n g l 6-37
6
Tr
ou
ble
sh
oo
tin
g
Replacing the Desiccant Wheel
Assembly
(W600 - 1000)
When desiccant becomes clogged or contaminated, you should replace the desiccant wheel
to ensure optimum performance.
1
Stop the dryer, disconnect and lockout the main power.
2
Remove the upper and lower side panels from both sides of the
dryer
.
3
Remove the top cover from the dryer by removing the securing bolts.
4
Note the position of all the hoses, RTDs, and wiring connections then remove or
disconnect
these from the desiccant wheel assembly.
5
If the dryer aftercooler is being used, turn off the water supply to the aftercooler
and disconnect the water lines from the aftercooler.
6
Remove the four bolts securing the aftercooler assembly to the cabinet frame.
7
Using an overhead crane or similar appropriate lifting device, use the lifting
points provided and carefully lift the aftercooler off of the frame and remove it
from the dryer.
8
Remove the four bolts securing the desiccant wheel assembly to the dryer
frame.
9
Note the orientation of the desiccant wheel assembly. Using an overhead crane or
similar device, use the lifting rings provided and lift the desiccant wheel assem-
bly out of the dryer.
(continued)
NOTE: If your dryer is configured with a hard pipe kit, disconnect the hard piping from the top of
the dryer at this time.
✐
OFF
O
ON
I