Conair Carousel Plus UGD043-1216, Руководство пользователя

Страница: 117 / 176

M a i n t e n a n c e l 5-13
Cleaning the Volatile Trap on the
Demister
(W600 - 1000)
1
Stop the dryer and lockout the main power.
2
Remove the thumbscrews then remove the volatile demister cover.
3
Remove the demister by pulling it out from the housing.
4
Clean the assembly using a mild soap and water.
Let the assembly dry
thoroughly before installation.
NOTE: In cases of heavy volatiles, steam cleaning, pressure washing or the use of solvents, such
as acetone, may be necessary. Be sure to test a small area with the solvent you have selected to
be sure there is no adverse reaction.
5
Insert the demister carefully back into the housing, making sure to
completely push it towards the back of its housing.
6
Inspect the condition of the gasket.
If it is damaged, replace the gasket.
7
Secure the cover in place using the original thumbscrews.
✐
NOTE: Depending on the
build date and configura-
tion of your dryer, your
demister may be on the
right side of the after-
cooler. Removal and
cleaning procedures are
the same.
✐
OFF
O
ON
I
5
Maintenance