Comtech EF Data MetaCarrier MCDD-100, Инструкция по установке и эксплуатации

Страница: 61 / 88

6–1
Chapter 6. ETHERNET-BASED
REMOTE PRODUCT
MANAGEMENT
6.1 Introduction
Ethernet-based Remote Product Management is available through the MCDD-100 MetaCarrier®
Detection Device’s ‘ETHERNET MANAGEMENT’ RJ-45 10/100 BaseT Fast Ethernet port.
1. TO PROCEED WITH ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
(SNMP OR WEB SERVER), ASSUMPTIONS ARE MADE THAT:
•
The MCDD-100 is operating with the latest version firmware files.
•
The MCDD-100 is connected to a user-supplied, Windows-based PC, and:
o
The PC serial port is connected to the MCDD-100’s serial ‘CONSOLE’
port with a user-supplied serial cable.
o
The PC Ethernet port is connected to the MCDD-100’s RJ-45 ‘ETHERNET
MANAGEMENT’ port with a user-supplied hub, switch, or direct
Ethernet cable connection.
o
The PC is running a terminal emulation program (for operation of the
MCDD-100’s Serial Interface) and a compatible Web browser (for
operation of the MCDD-100 Web Server Interface).
• The MCDD-100’s Management IP Address has been noted using the
MCDD-100 Serial Interface.
Note that, while use of the serial port connection/Serial Interface is
required only for initial configuration of the ‘ETHERNET MANAGEMENT’
port, it is also useful for firmware updating operations.
2. USE OF THE ETHERNET-BASED SNMP INTERFACE IS RECOMMENDED ONLY FOR
ADVANCED USERS. ALL OTHER USERS ARE STRONGLY ENCOURAGED TO USE