Comtech EF Data MetaCarrier MCDD-100, Инструкция по установке и эксплуатации

Страница: 59 / 88

MCDD-100 MetaCarrier Detection Device Revision 3
Serial-based Remote Product Management MN-MCDD100
5–9
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Reset Password DPW= None Command only.
Resets the username/password to the factory defaults, where:
Username = “comtech”
Password = “comtech”
Note: This command takes no arguments.
Example: DPW=
DPW= N/A N/A
Management IP
Address
IPA= 18 bytes numerical Command or Query.
Sets the IP Address and network prefix for the 10/100 BaseT Ethernet
Management | FE port, in the form aaa.bbb.ccc.ddd/yy, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
yy = network prefix (range: 8 to 31)
Example: IPA=010.006.030.001/24
IPA=
IPA?
IPA*
IPA#
IPA? IPA=xxx.xxx.xxx.xxx/yy
(see Description of
Arguments)
Gateway IP
Address
IPG= 15 bytes numerical Command or Query.
Sets the IP Gateway Address for the 10/100 BaseT Ethernet Management | FE
port, in the form aaa.bbb.ccc.ddd, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
Example: IPG=010.006.030.002
IPG=
IPG?
IPG*
IPG#
IPG? IPG=xxx.xxx.xxx.xxx (see
Description of Arguments)