Comtech EF Data CDM-Qx, Инструкция по установке и эксплуатации

Страница: 203 / 224

CDM-Qx Satellite Modem Revision 6
Remote Control MN/CDMQx.IOM
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for
Command or
Response to
Query
Description of arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
BUC Low Current
Limit BCL= 4 bytes Command or Query BCL= BCL? BCL=xxxx
BUC Low Current Limit, a value between 100 and 3000 mA BCL? (see description of
arguments)
(L-Band Unit
only) BCL*
Example: BCL=0600 BCL#
BCL^
BUC LO
Frequency BLO= 6 bytes Command or Query BLO= BLO? BLO=xxxxxs
BUC transmit LO frequency information in the form: xxxxxs, where : BLO? (see description of
arguments)
(L-Band Unit
only) xxxxx is the LO frequency in the range of 3000 to 65000 MHz BLO*
All 0’s (000000) disables the feature BLO#
S is the sign for the mix (+ or – character) BLO^
Terminal Frequency= BUC LO TFQ
Example: BLO=12000+ (BUC LO is 12 GHz, low-side mix)
BUC Output
Power Level N/A 4 bytes Query only N/A BOL? BOL=xx.x
BUC output power level in the form xxx, where xxx is the value in
watts. (see description of
arguments)
(L-Band Unit
only)
Example: BOL=08.3 (BUC reports output is 8.3 watts)
Returns 00.0 when FSK and BUC power are not enabled.
BUC
Temperature N/A 4 bytes Query only N/A BUT? BUT=sxx
Indicates BUC temperature, in the form: sxxx (see description or
arguments)
(L-Band Unit
only) Where:
s=sign (+ or – character)
xx=value
If not available, response is –99
Example: BUT=-13 (BUC temperatures is -13
°
C)
Note: This query is only valid when the FSK and BUC power are turned On.
BUC PLL Alarm N/A 1 byte, value of
0,1 Query only N/A BPA? BPA=x
(L-Band Unit
only) BUC PLL lock state, where: (see description of
arguments)
0=Unlocked
1=Locked
Example: BPA=1 (BUC PLL is locked)
Note: This query is only valid when the FSK and BUC power are turned On
BUC Software
Version N/A 3 bytes Query only N/A BSV? BSV=x.x
Indicates the BUC software version, in the form: x.x (see description of
arguments)
(L-Band Unit
only)
Example: BSV=1.1 (Software version 1.1)
Note: This query is only valid when the FSK and BUC power are turned On
C-37