Comtech EF Data CDM-Qx, Инструкция по установке и эксплуатации

Страница: 200 / 224

CDM-Qx Satellite Modem Revision 6
Remote Control MN/CDMQx.IOM
C.5.5 Bulk Commands
Parameter
Type
Command
(Instruction
Code and
qualifier)
Argument
s for
Command
or
Response
to Query
Description of arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
Global Configuration MGC= 138 bytes, with
numerical entries,
fixed values and
delimiters
Command or Query
Global Configuration of CDM-QX on a card slot basis if not grouped as a modem or on a modem basis if grouped. If
the card is a Tx and ungrouped as modem, the Rx field will be filled with ‘x’, and vice-versa.The format is:
abcdddd.ddddefghhhhh.hhhijkk.klmnoppp.ppqrstuvvvvvvvAAAA.AAAABCDEEEEE.EEEFGHIIIJJ.JKLMNOPPPPPPP
QRSSSSTUUUUUUUUUUUUVWXYYYZZZ.ZZZaaabbbbbbbb where:
MGC=
MGC?
MGC*
MGC#
MGC$
MGC^ MGC?
MGC=abcdddd.ddddefghhhhh.hhhijkk.klmnop
pp.ppqrstuvvvvvvvAAAA.AAAABCDEEEEE.E
EEFGHIIIJJ.JKLMNOPPPPPPPQRSSSSTUU
UUUUUUUUUUVWXYYYZZZ.ZZZaaabbbbbb
bb
MGC?n Where n=0 to 9 a=Unit Interface Type same as ITF
b=T1 Line Build-out same as LBO
Returns the MGC portion of 1
of 10 stored configurations
c=Unit framing mode same as FRM
dddd.dddd=Tx Frequency same as TFQ
e=Tx FEC Type same as TFT
(see description of arguments)
f=Tx Modulation Type same as TMD
g=Tx FEC Rate same as TCR
hhhhh.hhh=Tx Data Rate same as TDR
i=Tx Spectrum Inversion same as TSI
j=Tx Scrambler State same as TSC
kk.k=Tx Power Level same as TPL
l=Tx Clock Source same as TCK
m=Tx Data Invert same as TDI
n=Tx Carrier State same as TXO
o=AUPC Enable same as AUP
ppp.pp=AUPC Parameter Setup same as APP
q=Warm-up Delay same as WUD
r=Tx Common Output state same as TXC
s=Tx Reed-Solomon (n, k) value same as TRS
t=Tx roll-off (alpha) factor same as TXA
u=Tx Data Clock Invert same as TCI
vvvvvvv=Expansion Bytes
AAAA.AAAA=RX Frequency same as RFQ
B=RX FEC Type same as RFT
C=RX Modulation Type same as RMD
D=RX FEC Rate same as RCR
EEEEE.EEE=RX Data Rate same as RDR
F=RX Spectrum Inversion same as RSI
G=RX Descrambler State same as RDS
H=RX Data Invert same as RDI
III=RX Sweep Width same as RSW
JJ.J=Eb/No Alarm Point same as EBA
K=RX Buffer Clock Source same as BCS
L=RX Reed-Solomon (n, k) values same as RRS
M= RX Buffer Size same as RBS
N=RX Data Clock Invert same as RCI
O=Rx roll-off (alpha) factor same as RXA
PPPPPPP=Expansion Bytes
Q=External Reference Bytes same as ERF
R=EDMAC Framing Mode same as EFM
SSSS=EDMAC Slave Address same as ESA
T=Unit Test Mode (Read only) same as TST
UUUUUUUUUUUU=Unit Alarm Mask same as MSK
V=RTS/CTS Control same as RTS
W=Statistics Sampling Interval same as SSI
X=CnC Mode same as CNM
YYY=CnC Frequency Offset same as CCF
ZZZ.ZZZ=CnC Min/Max Search Delay same as CSD
same as CRA
aaa=CnC Re-Acquisition time
bbbbbbbb=Epansion Bytes
Fill unused expansion bytes with ‘x’
C-34