Comtech EF Data CDM-Qx, Инструкция по установке и эксплуатации

Страница: 195 / 224

CDM-Qx Satellite Modem Revision 6
Remote Control MN/CDMQx.IOM
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
query
(Target to
Controller)
Retrieve next 5
unread stored Events N/A 80 bytes Query only
Unit returns the oldest 5 Stored Events, which have not yet been
read over the remote control. Reply format: {CR}Sub-
body{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-
body{CR}, where Sub-body = ABCCddmmyyhhmmss,
A being the fault/clear indicator
F=Fault
C=Clear
I =Info
B being the fault type where:
1=Unit
2=RX Traffic on slot#1
3=RX Traffic on slot#2
4=RX Traffic on slot#3
5=RX Traffic on slot#4
6=TX Traffic on slot#1
7=TX Traffic on slot#2
8=TX Traffic on slot#3
9=TX Traffic on slot#4
A=ODU
B=Power ON/OFF, or log cleared
CC is Fault Code numbers, as in FLT? Or Infor Code, which is:
0=Power Off
1=Power On
2=Log Cleared
3=Global Config Change
4=Redundancy Config Change
If there are less than 5 events to be retrieved, the remaining
positions are padded with zeros.
If there are no new events, the response is RNE*.
N/A RNE? RNE=
{CR}ABCCddmmyyhh
mmss{CR}ABCCddm
myyhhmmss{CR}ABC
Cddmmyyhhmmss
{CR}ABCCddmmyyhh
mmss{CR}ABCCddm
myyhhmmss
(see description of
arguments)
Number of Unread
stored Statistics
(Modem Only) N/A 3 bytes Query only
Unit returns the number of stored Statistics, which remain Unread,
in the form xxx. N/A NUS? NUS=xxx
(see description of
arguments)
C-29