Comtech EF Data CDM-Qx, Инструкция по установке и эксплуатации

Страница: 95 / 224

CDM-Qx Satellite Modem Revision 6
Front Panel Operation MN/CDMQx.IOM
(Monitor
%
Event-Log
%
View) – VIEW STORED EVENTS
The user may scroll backwards or forwards through the entries in the event log, using the
#$
arrow keys. Pressing
ENTER
or
CLEAR
takes the user back to the previous menu.
The event log can store up to 255 events. When a fault condition occurs, it is time-
stamped and put into the log. Similarly, when the fault condition clears, this is also
recorded, as shown below:
If the user selects
Clear-All
, the event log is cleared, and the user is taken directly back
to the previous menu. However, if there are faults present on the unit at this time, they
will be re-time-stamped, and new log entries will be generated.
IMPORTANT:
Note that in accordance with international convention, the
date is shown in DAY-MONTH-YEAR format
.
IMPORTANT
5.7.2.4 (Monitor
%
Stats) – LINK STATISTICS
(for grouped as modem only)
Selecting
Stats
displays the following submenu:
Link Statistics: View
Clear-All Config ( ◄ ► , ENT)
Select
View
,
Clear-All
or
Config
using the
◄ ►
arrow keys, then press
ENTER
.
(Monitor
%
Stats
%
View) – VIEW LINK STATISTICS
Selecting
VIEW
displays the following screen:
Sta198: 02/11/02 10:37:32
16.0, 16.0, 9.0, 9.0 ( ▲▼ , ENT)
Top line:
Log entry number
;
Time and date of the entry
(
Note:
In accordance with international
convention, the date is shown in DAY-MONTH-YEAR format.)
Bottom line:
Measured and recorded statistics data:
Minimum Eb/No, Average
Eb/No, Maximum TPLI, Average TPLI (where TPLI means Transmit
Power Level increase, if AUPC is enabled).
The user may scroll backwards or forwards through the entries in the statistics log, using
the
#$ arrow keys. Pressing
ENTER
or
CLEAR
takes the user back to the previous
menu. The event log can store up to 255 events.
5–47