Comtech EF Data CDM-Qx, Инструкция по установке и эксплуатации

Страница: 202 / 224

CDM-Qx Satellite Modem Revision 6
Remote Control MN/CDMQx.IOM
C.5.6 BUC Commands
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for
Command or
Response to
Query
Description of arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
BUC Address BAD= 2 bytes, value
of 01 to 15 Command or Query BAD= BAD? BAD=xx
(L-Band Unit
only) Indicates the Block Up Converter (BUC) Address, in the form: xx,
where xx is between 01 and 15 BAD? (see description of
arguments)
BAD*
BAD#
Example: BAD=03 BAD^
Note: This command is only valid when the FSK and BUC power are
enabled.
BUC Comms
Enable BCE= 1 byte, value of
0,1 Command or Query BCE= BCE? BCE=x
Enables or disables communications, via the FSK link, with an
externally connected BUC, where: BCE? (see description of
arguments)
(L-Band Unit
only) BCE*
0=Disabled BCE#
1=Enabled BCE^
Example: BCE=0 (Disabled)
BUC Power
Control BPC= 1 byte, value of
0,1 Command or Query BPC= BPC? BPC=x
0=Disable BUC DC Power BPC? (see description of
arguments)
(L-Band Unit
only) 1=Enable BUC DC Power BPC*
BPC#
BPC^
BUC 10 MHz
Reference BFR= 1 byte, value of
0,1 Command or Query BFR= BFR? BFR=x
Enables or disables the 10 MHz frequency reference to the BUC. BFR? (see description of
arguments)
(L-Band Unit
only) 0=Disabled BFR*
1=Enabled BFR#
BFR^
BUC Output
Enable BOE= 1 byte, value of
0,1 Command or Query BOE= BOE? BOE=x
Indicates BUC Output enable BOE? (see description of
arguments)
(L-Band Unit
only) 0=Off (Output Disabled) BOE*
1=On(Output Enabled) BOE#
BOE^
Example: BOE=1 (BUC Output is Enabled)
Note: This command is only valid when the BUC FSK comms and BUC
power are enabled.
BUC High
Current Limit BCH= 4 bytes Command or Query BCH= BCH? BCH=xxxx
BUC High Current Limit, a value between 500 and 3200 mA BCH? (see description of
arguments)
(L-Band Unit
only) BCH*
Example: BCH=3100 BCH#
BCH^
C-36