Comrex ACCESS STEREO BRIC IP Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 119

background image

ACCESS Product Manual

107

This warranty does not apply if the product has been damaged by accident
or misuse or as a result of service or modification performed by anyone
other than Comrex Corporation.

The next two paragraphs apply to all software contained in this product:

WITH THE EXCEPTION OF THE WARRANTIES SET FORTH ABOVE, THE
PRODUCT (MEANS COLLECTIVELY THE HARDWARE AND SOFTWARE
COMPONENTS) IS PROVIDED STRICTLY “AS-IS.” COMREX CORPORATION
AND ITS SUPPLIERS MAKE NO WARRANTY, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MER-
CHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY
AGAINST LATENT DEFECTS. COMREX CORPORATION AND ITS SUPPLI-
ERS DO NOT WARRANT THAT THE PRODUCT IS ERROR-FREE, THAT ALL
ERRORS MAY BE DETECTED OR CORRECTED, OR THAT THE USE OF
THE PRODUCT WILL BE UNINTERRUPTED. IN NO EVENT WILL COMREX
CORPORATION AND ITS SUPPLIERS BE LIABLE FOR INDIRECT, INCIDEN-
TAL, SPECIAL OR CONSEQUENTIAL DAMAGE RESULTING FROM THE
USE OF THE PRODUCT INCLUDING LOSS OF PROFITS, LOSS OF SAV-
INGS, LOSS OF USE OR INTERRUPTION OF BUSINESS EVEN IF COMREX
CORPORATION OR ANY OF ITS SUPPLIERS HAS BEEN ADVISED OF THE
POSSIBILITY OF SAME. IN NO EVENT SHALL COMREX CORPORATION
AND/OR ITS SUPPLIERS’ TOTAL LIABILITY TO YOU REGARDLESS OF THE
FORM OF ACTION EXCEED THE AMOUNT YOU PAID AS PART OF THE
PURCHASE PRICE OF THIS PRODUCT. COMREX CORPORATION AND ITS
SUPPLIERS MAKE NO WARRANTY, EITHER EXPRESSED OR IMPLIED, THAT
ANY USE OF THE PRODUCT WILL BE FREE FROM INFRINGEMENT OF
PATENTS, COPYRIGHTS, OR ANY OTHER THIRD PARTY’S INTELLECTUAL
PROPERTY RIGHTS.

THE SOFTWARE OWNED BY COMREX CORPORATION OR BY ITS SUPPLI-
ERS RESIDING IN OR OTHERWISE ASSOCIATED WITH THIS PRODUCT
ARE PROTECTED UNDER COPYRIGHT LAW AND INTERNATIONAL TREA-
TIES. UNAUTHORIZED REVERSE ENGINEERING, REPRODUCTION AND/
OR DISTRIBUTION OF THE PRODUCT OR ANY PORTION THEREOF, IS
STRICTLY PROHIBITED AND MAY RESULT IN CIVIL AND CRIMINAL SANC-
TIONS, AND WILL BE PROSECUTED TO THE FULL EXTENT OF THE LAW.
COMREX CORPORATION AND ITS SUPPLIERS OWNS AND SHALL RETAIN
ALL RIGHT, TITLE AND INTEREST IN AND TO ANY SOFTWARE SUPPLIED
TO YOU IN AND AS PART OF THE PRODUCT AND ALL INTELLECTUAL
PROPERTY RIGHTS RELATED THERETO. THE SALE OF THE PRODUCT
SHALL NOT BE CONSTRUED IN ANY MANNER AS TRANSFERRING ANY
RIGHT OF OWNERSHIP IN ANY SUCH SOFTWARE.

«
...
105
106
107
108
109
...
»

Содержание ACCESS STEREO BRIC IP
























































































































Отзывы:

Нет отзывов

Похожие инструкции для ACCESS STEREO BRIC IP

Бренд: Samsung Страницы: 22

REMOTE ACCESS SYSTEM 1500

Бренд: 3Com Страницы: 62

Бренд: Tokai Страницы: 20

MorphoAccess VP MD

Бренд: Idemia Страницы: 29

Бренд: Hame Страницы: 26

SoundPoint IP 320

Бренд: Polycom Страницы: 2

Бренд: Stahl Страницы: 24

Бренд: AbleNet Страницы: 8

Бренд: JBL Страницы: 2

Бренд: ClearOne Страницы: 48

Бренд: Jensen Страницы: 4

Zynq UltraScale+

Бренд: Xilinx Страницы: 86

SmarTouch Digital

Бренд: ACC Страницы: 28

Бренд: Jensen Страницы: 80

Бренд: Cattron Страницы: 102

SAPM38 - CD STEREO SYSTEM

Бренд: Panasonic Страницы: 48

Бренд: Halytech Страницы: 2

Бренд: Sherwood Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды