Comrex ACCESS STEREO BRIC IP Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 119

background image

C

omrex

C

orporation

106

Further copyright notice for ncurses, dropbear PuTTY and libxml2

Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the “Software”),
to deal in the Software without restriction, including without limitation the
rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

Libpcap
tcpdump

Copyright © 1988, 1989, 1991, 1994, 1995, 1996, 1997
The Regents of the University of California. All rights reserved.

Redistribution and use in source and binary forms, with or without modifi-
cation, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documenta-
tion and/or other materials provided with the distribution.
3. The names of the authors may not be used to endorse or promote prod-
ucts derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IM-
PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTIC-
ULAR PURPOSE.

All Equipment manufactured by Comrex Corporation is warranted by
Comrex against defects in material and workmanship for one year from the
date of original purchase, as verified by the return of the warranty regis-
tration card. During the warranty period, we will repair or, at our option,
replace at no charge a product that proves to be defective, provided you
obtain a return authorization from Comrex and return the product, ship-
ping prepaid to Comrex Corporation, 19 Pine Rd, Devens MA 01434 USA.
For return authorization, contact Comrex at 800-237-1776 or 978-784-1776
or email [email protected].

W

ArrAnty

«
...
104
105
106
107
108
...
»

Содержание ACCESS STEREO BRIC IP
























































































































Отзывы:

Нет отзывов

Похожие инструкции для ACCESS STEREO BRIC IP

ElectraElite IPK

Бренд: NEC Страницы: 20

UNIVERGE SL2100

Бренд: NEC Страницы: 196

UNIVERGE SL2100

Бренд: NEC Страницы: 174

ElectraElite IPK

Бренд: NEC Страницы: 151

Бренд: 3M Страницы: 2

Бренд: 3M Страницы: 2

Бренд: Barco Страницы: 4

Бренд: Hama Страницы: 75

Бренд: Goodmans Страницы: 22

Бренд: Zonex Страницы: 28

Бренд: YA Страницы: 2

PressureMAT PMAT2

Бренд: PendoTECH Страницы: 48

Бренд: DIS Страницы: 54

SmartShop Maker

Бренд: Laguna Tools Страницы: 70

Бренд: btsr Страницы: 45

Бренд: Siemens Страницы: 65

Liebert Mini-Mate MT036

Бренд: Vertiv Страницы: 80

Conference Connect

Бренд: Logitech Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды