Comrex ACCESS STEREO BRIC IP Скачать руководство пользователя страница 111 | Manualshive

Страница: 111 / 119

background image

ACCESS Product Manual

111

This equipment complies with Part 68 of the FCC rules and the require-
ments adopted by the ACTA, as well as the applicable Industry Canada
technical specifications. On the bottom of this equipment is a label that
contains, among other information, a product identifier in the format US:
DXDMD01BACCRK. If requested, this number must be provided to a U.S.
telephone company.

Telephone line connections to the Comrex ACCESS Rack are made via an
RJ11C jack. A plug and jack used to connect this equipment to the prem-
ises wiring and telephone network must comply with the applicable FCC
Part 68 rules and requirements adopted by the ACTA. A compliant tele-
phone cord and modular plug is provided with this product. It is designed
to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.

The REN is used to determine the number of devices that may be con-
nected to a telephone line. Excessive RENs on a telephone line may result
in the devices not ringing in response to an incoming call. The sum of
RENs should not exceed five (5.0). To be certain of the number of devices
that may be connected to a line, as determined by the total RENs, contact
the local telephone company. The REN for the Comrex ACCESS Rack is 0.1,
and is shown as the digits represented by ## in the product identifier US:
DXDMD###ACCRK.

If the Comrex ACCESS Rack causes harm to the telephone network, the
telephone company will notify you in advance that temporary discontinu-
ance of service may be required. But if advance notice isn’t practical, the
telephone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe
it is necessary.

The telephone company may make changes in its facilities, equipment, op-
erations, or procedures that could affect the operation of this equipment.
If this happens the telephone company will provide advance notice in
order for you to make necessary modifications to maintain uninterrupted
service.

If trouble is experienced with the Comrex ACCESS Rack, please contact
Comrex Corporation at 978-784-1776 for repair or warranty information.
If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the prob-
lem is solved.

u.S.

And

c

AnAdIAn

r

egulAtory

I

nForMAtIon

For

the

AcceSS r

Ack

«
...
109
110
111
112
113
...
»

Содержание ACCESS STEREO BRIC IP
























































































































Отзывы:

Нет отзывов

Похожие инструкции для ACCESS STEREO BRIC IP

Бренд: Daewoo Страницы: 38

Бренд: WAGO Страницы: 46

Бренд: Nakamichi Страницы: 13

Бренд: Anker Страницы: 19

Бренд: Grandstream Networks Страницы: 20

Бренд: Oase Страницы: 87

Бренд: Quanser Страницы: 4

Soundpoint 7000

Бренд: Polycom Страницы: 9

Бренд: Fuslon Страницы: 14

Бренд: Tibo Страницы: 33

Бренд: 2VV Страницы: 19

Бренд: 2VV Страницы: 24

Бренд: Boss Audio Systems Страницы: 7

AirGENIO SUPERIOR

Бренд: 2VV Страницы: 12

Бренд: Philips Страницы: 32

Бренд: Accutrol Страницы: 16

Бренд: Omron Страницы: 297

Бренд: Yamaha Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды