Comrex ACCESS MultiRack, Руководство по эксплуатации продукта

Страница: 52 / 116

52
FIgure 31 4g cellulAr modem settIngs
ADVANCED ETHERNET PORT SETTINGS
When
Show Advanced Settings
(in the lower left corner) is selected, the following options also appear:
Preserve After Reset
- This option ensures that changes to the unit’s network configuration will be preserved even
if the device is reset to factory defaults. This setting is disabled by default, however, and Comrex advises users to
be cautious when enabling it. If the Ethernet parameters are set incorrectly, it is possible to be locked out of the
MultiRack, and you will then have to use the
Device Manager
program‘s Network Recovery Mode (discussed on
Page 26
) in order to log into it.
Use With CrossLock
- This option allows for specifying whether this Ethernet port will be used for
CrossLock
connections, and is enabled by default. It may be valuable to disable this setting in select circumstances, however,
such as when using the main Ethernet for control purposes only, or as a secondary port (added via USB-Ethernet
converter) for
CrossLock
media.
Broadcast Config
- This option allows the unit to be identified and configured via broadcast communication on the
web-based interface and
Device Manager
. It is enabled by default.
Static Route Settings
- This option presents advanced network configuration for users with complex and
multilayered networks. As this is an uncommon need for most users, Comrex recommends users interested in
learning more refer to the Static Routing Technical Note at www.comrex.com.