Comrex ACCESS MultiRack, Руководство по эксплуатации продукта

Страница: 30 / 116

30
• Configuration Tabs ( 2 ): The primary focus of the MultiRack configuration interface. These tabs consist of
Connections, Dashboard, Audio, Profile Manager, and Instance Settings to control and obtain status of
MultiRack. They are described in detail in the following sections.
2
1
FIgure 14 connectIons tAb
CONNECTIONS TAB
The Connections Tab is the first window in the configuration interface. This allows for monitoring device
connectivity and controlling connections. In this tab, the names and IP addresses of remote units can be saved. To
add a new remote unit to the list, select the “
+ ” icon on the right side of the list. A dialogue box will appear asking
for a name for the unit as well as its IP address. An algorithmic profile must be selected for the new codec unit.
To get started, choose one of the default profiles provided. Custom profiles are possible and are covered in a later
section. In the event that a stored unit is no longer desired, they can be deleted through the
Trash Icon option.
The Connections tab will display Name and Status information of a remote Comrex codec when it has initiated a
connection to the MultiRack. Information from units connected this way will only appear while the connection is
active.
By default, three remotes appear on the list. These remotes are used for troubleshooting connectivity and include:
1. Loopback - Allows for localhost, testing the connection of the rack and remotes on the network.
2. Comrex Lab Voice - This provides a talk feed from the Comrex headquarters in Massachusetts, USA for
testing network connections.
3. Comrex Lab Music - This provides a music feed from the Comrex headquarters in Massachusetts, USA for
testing network connections.
DASHBOARD TAB
The Dashboard Tab is designed to be open during active connections ( Figure 15 ). It provides a quick view of some
vital parameters for use during live streaming.