Compool Cp3830, Инструкция по установке и эксплуатации

Страница: 27 / 45

25
Compool Cp3830
Configuration Switches
After setting configuration switches, turn system power off for a few seconds.
FREEZE
Freeze settings are used to configure the following equipment.
SFLT Activate spa filter pump during freezing conditions.
PFLT Activate pool filter pump during freezing conditions.
AUX1 Activate AUX1 during freezing conditions.
AUX2 Activate AUX2 during freezing conditions.
AUX3 Activate AUX3 during freezing conditions.
AUX4 Activate AUX4 during freezing conditions.
AUX5 Activate AUX5 during freezing conditions.
AUX6 Activate AUX6 during freezing conditions.
I/L - Interlock
Interlock settings are used to configure the following equipment.
FDEL Activate filter delays (heater cool down).
CLNR Activate cleaner interlocks. Cleaner must be installed on AUX1.
SYST - System
System settings are used to configure the following equipment.
MANHT Activate heater when spa is manually turned on.
SSOL Activate spa solar system.
SHPMP Activate spa heatpump as secondary heat source.
PSSOL Activate pool solar system.
PHPMP Activate pool heatpump as secondary heat source.
FLRCL Activate floor cleaner valve.
SPC FNCT - Special Functions
Special Functions settings are used to configure the following equipment.
DIM3 Activate dimmer for AUX3 circuit.
DIM4 Activate dimmer for AUX4 circuit.
B/W Activate backwash circuit.
1 2 3 4 5 6 7
ON
8 1 2 3 4 5 6 7
ON
8 1 2 3 4 5 6 7
ON
8
SFLT PFLT AUX1 AUX2 AUX3 AUX4 AUX5 AUX6
FREEZE I/L SYST
SPC FNCT
FDEL CLNR MANHT SSOL SHPMP PSOL PHPMP FLRCL DIM3 DIM4 B/W SHEAT SAUX2 PHEAT PAUX1
HI SPD