Security
7-13
You can define a read password in the field
Read Password
on the
SNMP
tab
(Select Access Point from list, click
Edit
and select
SNMP
tab). The default value
is “public”.
Read/Write password
A read/write password will provide you with full access to display Access Point
diagnostic information found under the
Monitor
button, as well as the
configuration settings found under the
Edit
button.
Entering an incorrect password will result in a time-out error, or “SNMP error
no such name”.
To define a read/write password:
1. Start the A PManager and select the target Access Point from the list or
enter a specific IP address.
2. Click the
Edit
button to connect to the Access Point.
3. Select the
SNMP
tab.
4. In the field
Read/Write Password
, enter the new password. The default value is
“public”.
5. Click
OK
to save the configuration to the Access Point. The Access Point
will now reboot.
SNMP IP Access List
In addition to the read and read/write passwords, you can restrict access to the
Access Point configuration to a limited number of authorized stations.
To authorize the 11Mbps Wireless LAN management station to access your
Access Points, you must identify:
■
the unique IP address of the management station, and
■
the Access Point interface (port) via which this station will access the
configuration
If you wish to authorize multiple stations, you can identify a range of IP
addresses that you will reserve for authorized LAN administrator stations.
Note: When using the SNMP IP access list, you should include the IP address
of all stations that will need to retrieve configuration or diagnostic
information of the Access Point, i.e. stations of administrators who use
either read or read/write passwords.
When the IP address or interface does not match the listing in the SNMP IP
access list, the requester will receive a time-out error.
To authorize a management station via the SNMP IP access list:
1. Start the A PManager and select the Access Point.
2. Click the
Edit
button to connect to the Access Point.
Содержание WL110
