Compaq WL110, Руководство пользователя

Страница: 50 / 144

5-16 Monitoring your 11Mbps Wireless LAN Network
❏
Manual data logging - to manually record your link measurements.
Optionally, you can add comments each time you log data by clicking
the “Add comments” check box.
❏
Automatic data logging - to automatically log data. You must enter a
time interval between measurements.
❏
Continuous data logging (only available in Link Test window) - Auto-
matically log data with the following interval:
— Once per second, or
— Once per minute
In all modes, the measurement data is saved in the file entered in the
Log Filename
field. Each time new data is saved, this information is appended to the existing
file. If you wish to save the data in a new file, use this field to enter a new
filename.
Starting/Stopping the Logging Function
Depending on your choice of logging option, the logging button will read either
Log Once
(manual option) or
Start Log
(automatic options).
■
For manual logging, click the “Log Once” button each time you wish to log
data. Logging stops automatically after the data is recorded to the log file.
■
For automatic logging, click the
Start Log
button. Click the
Stop Log
button to
stop the logging function.
Diagnose Card
If you suspect that your wireless client adapter may not be functioning properly,
you can select
Diagnostics
in the
Advanced
menu of the main Client Manager
window to investigate the functionality of the hardware and software of the card.
The Diagnose Card window allows you to check the software and firmware
information, configuration information as well as communication statistics.
To test the wireless client adapter, click the
Test Card Now
button on the
Card Check
tab.
Note: Running the card test will disrupt the normal operation of your wireless
client adapter, which may result in a temporary loss of your connection
to the network.
If the wireless client adapter passes all tests, the test status will read “OK” in all
fields, and the Error Code field will remain blank. If an error occurs, click the
Advice
button for more information on how to handle the error.
Troubleshooting Site Monitor
When the Site Monitor does not display (all of) the Access Points that you
expected, this may be due to one or more of the following reasons: