Compaq WL110, Руководство пользователя

Страница: 107 / 144

Advanced Network Configurations 8-7
To filter out traffic between such devices add the MAC addresses of both
devices as a pair in the
Static MAC address Filter
list.
The way the filter works is that when one of the listed stations sends a message
to a MAC address that has been identified as a pair, the Access Point will not
forward it via the wireless station. All traffic that one of the stations wishes to
send to any other (non-paired) MAC address will be forwarded.
For more information about static MAC address filtering, please refer to chapter
6 “Optimizing Performance”.
Spanning Tree
The
Spanning Tree
button allows you to set parameters that are used in
determining the optimum path for network traffic to travel.
You can use spanning tree in a network that has been designed to include loops,
such as a redundant wired link used as a back-up to the main wireless link.
Figure 8-3 Spanning Tree Setup window
To enable spanning tree:
1. Click the
Spanning Tree
button to open the Spanning Tree Setup window (see
Figure 8-3).
2. Click the
Enable Spanning Tree
check box;
3. Use default values (see Figure 8-3);
4. Click
OK
to return to the
Bridge
tab.