Compaq WL110, Руководство пользователя

Страница: 139 / 144

Forced Reload Procedure C-7
not influence the functionality of the software file. For more information
see “Upload Software, a Look under the Hood” on pa geD-2.
When you want to preserve the original software file, make a back-up copy
of this file.
11. You are again prompted to confirm the “Reload of the Remote System”.
Check the list of parameters displayed thoroughly to make sure all settings
are right.
❏
If the pop-up window does not display the correct IP address and/or
SNMP passwords, click
No
to cancel.
❏
If the IP address and/or SNMP passwords are correct, click
Yes
to pro-
ceed.
12. The AP Manager program will upload the new (restored) configuration to
your Access Point and load it into the FlashROM. The Access Point will
reboot and start bridging operation in approximately 60 seconds.
Creating a Back-up File
You are advised to save the configuration parameters of the Access Point to a
back-up file (*.cnf). To create a back-up file, use the
Download Config File
option
from the Access Point menu.
You are advised to create a back-up file, to anticipate future network errors that
might force you to perform a forced reload in the future.
Save the back-up file under a name that allows for easy identification in the
future.
Start-up Diagnostics
On reboot, the Access Point will perform start-up diagnostics characterized by a
LED sequence, where the LEDs will change color in the range Amber, Red and
Green.
The start-up diagnostics take approximately 15 seconds. When finished the
Access Point will start bridge operation characterized by the LED activity. See
appendix B “Troubleshooting” for more information.