F-10
Compaq ProLiant CL380 User Guide
Compaq Confidential – Need to Know Required
Writer:
Marcello Frau
Project:
Compaq ProLiant CL380 User Guide
Comments:
First Draft
Part Number:
118128-003
File Name:
l-appf Updating the KVM Firmware.doc
Last Saved On:
8/28/00 4:52 PM
Setting a Custom Scan Pattern
To set a custom scan pattern:
1.
In the Advanced Menus screen, move the highlight to the Setup menu.
2.
Highlight Scan and press
Enter
. The Scan Pattern Setup screen appears
with the first port position (or computer name) highlighted.
SCAN PATTERN SETUP
Port
Sec
Name
1
20
NODE 1
2
20
NODE 2
3.
Type the port number of the first computer to be included in the scan
–
or
–
If your computers are listed by name, type the first few letters of the
name of the first computer to be included in the scan.
4.
Move the highlight to the Sec column, and then type the number of
seconds that you want this computer to be selected before switching to
the next computer in the sequence.
5.
Move the highlight to the next line and repeat steps 3 and 4 for each of
the remaining computers.
6.
Press
F2
to set all computers to the default time of 14 seconds.
7.
Press
Enter
to save the settings and exit the menu. The new scan pattern
replaces the standard or previous custom scan pattern
–or–
Press
F10
to restore default settings
–or–
Press
Esc
to exit the menu without saving the settings.
