manualshive.com logo in svg

Compaq Armada 7800 6266 T 5000 D 0 1, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
Compaq Armada 7800 6266 T 5000 D 0 1 Скачать руководство пользователя страница 78

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

4-2

Removal and Replacement Preliminaries

Cables and Connectors

Cables must be handled with extreme care to avoid damage. Apply only the tension
required to unseat or seat the cables during removal and insertion. Handle cables by the
connector whenever possible. In all cases, avoid bending, twisting, or tearing cables.
Ensure that cables are routed in such a way that they cannot be caught or snagged by
parts being removed or replaced. Handle flex cables with extreme care; they tear easily.

CAUTION:

  When servicing the computer, ensure that cables are placed in their proper

location during the reassembly process. Improper cable placement can damage the
computer.

4.3  Preventing Damage to Removable Drives

Removable drives are fragile components that must be handled with care. A hard drive
carrying case and a MultiBay device carrying case are supplied with the computer to
protect drives when they out of the drive bays. To prevent damage to the computer,
damage to a removable drive, or loss of information, observe these precautions:

■

Before removing or inserting a hard drive, shut down the computer. If you are unsure
whether the computer is off or in Hibernation, turn the computer on, then shut it
down.

■

Before removing a diskette drive or CD-ROM drive, ensure that a diskette or disc is
not in the drive. Ensure that the CD-ROM tray is closed.

■

Before handling a drive, ensure that you are discharged of static electricity. While
handling a drive, avoid touching the connector.

■

Handle drives on surfaces that have at least one inch of shock-proof foam.

■

Avoid dropping drives from any height onto any surface.

■

After removing a hard drive, place it into the hard drive carrying case. Do not place a
hard drive into the MultiBay device carrying case.

■

After removing a CD-ROM drive or a diskette drive, place it into the MultiBay
device carrying case.

■

Do not use excessive force when inserting a drive into a drive bay.

■

After inserting a hard drive into the hard drive bay, always reinsert either the original
hard drive security plate or the tamper-resistant security plate to prevent the hard
drive from accidentally disconnecting.

■

Avoid exposing a hard drive to products that have magnetic fields such as monitors
or speakers.

■

Avoid exposing a drive to temperature extremes or to liquids.

■

If a drive must be mailed, do the following. Place the drive into its carrying case.
Place the carrying case into a bubble pack mailer or other suitable form of protective
packaging. Label the package “Fragile: Handle With Care.”

Содержание Armada 7800 6266 T 5000 D 0 1






























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды