. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal and Replacement Procedures
5-23
NOTE:
You can secure the hard drive assembly in the MultiBay using a single- or
dual-bay security screw included with the computer.
Removing a Hard Drive from the MultiBay
Before removing a hard drive, back up all information on the hard drive.
1. Save all work, exit all applications, and shut down the computer.
2. Tilt the computer at an angle
1
so the bottom of the computer is accessible
(Figure 5-21).
3. If the hard drive assembly is secured in the MultiBay with a single- or dual-bay
security screw
2
, remove the screw with the security wrench included with the
computer.
4. Slide the MultiBay release latch
3
toward the rear of the computer.
5. Grasp the hard drive assembly using the recess
4
beneath the MultiBay.
Figure 5-21.
Releasing the Hard Drive Assembly from the MultiBay
