. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal and Replacement Procedures
5-65
14. The keyboard connector insulator is attached to the back of the keyboard connector
(Figure 5-59). If a new insulator must be installed, remove the old insulator, remove
the tape backing from the new insulator, and attach the new insulator to the back of
the keyboard connector.
Figure 5-59.
Removing the Keyboard Connector Insulator
Reverse the above procedure to install the keyboard connector insulator.
CAUTION:
The keyboard connector insulator must be present to prevent short circuits.
Failure to install the keyboard connector insulator can result in damage to the computer.
15. Remove the PC Card eject levers (Section 5.20).
