manualshive.com logo in svg

CommScope RUCKUS ICX 7550, Руководство по установке оборудования

Поделиться
Скачать
CommScope RUCKUS ICX 7550 Скачать руководство пользователя страница 59

Initial Setup and Verification

•

Items Required......................................................................................................................................................................... 59

•

Providing Power to the Device................................................................................................................................................. 59

•

Establishing a First-Time Connection to the Console Port........................................................................................................59

•

Configuring an IP Address for the Device................................................................................................................................. 62

•

Customizing the Host name and Chassis Name .......................................................................................................................63

•

Setting the Date and Time........................................................................................................................................................ 64

•

Establishing a Connection to the Out-of-Band Management Port........................................................................................... 64

•

Getting In-Band Access............................................................................................................................................................. 64

•

Verifying the Correct Operation............................................................................................................................................... 64

•

Backing Up the Running Configuration.................................................................................................................................... 65

Items Required

The following items are required for initial setup and verification of the device:

•

The device, mounted and installed with the required power supply, fan assemblies, transceivers, and cables

•

A workstation computer with a terminal emulator application installed, such as HyperTerminal for Windows

•

An unused IP address with corresponding subnet mask and gateway address

•

An USB console cable with Type-C connector (Type-C USB cable not included with the device)

•

An RJ-45 to RJ-45 eight-foot serial console cable (included with the switch in the accessory kit)

•

RJ-45 to DB-9 adapter (included with the switch in the accessory kit)

•

An Ethernet cable

•

Access to a TFTP server or USB removable media for backing up (uploading) or downloading the device configuration (optional)

Providing Power to the Device

After you complete the physical installation, you can power on the system.

1.

Install alternating-current (AC) or direct-current (DC) power supplies in the switch.

2.

Attach AC or DC power cables to the power supply connectors on the rear panel.

3.

Connect the power cables to the 100-240 VAC or 40-72 VDC power source.

NOTE
To turn the system off, simply unplug the power cable or cables.

NOTE
The equipment should be installed near a power source and in an easily accessible location.

Establishing a First-Time Connection to the Console Port

You can use either the USB Type-C console port or the RJ-45 serial console port to establish the first-time connection to the device. The console port
allows you to configure and manage the device using a third-party terminal emulation application from a workstation that is directly connected to

RUCKUS ICX 7550 Switch Hardware Installation Guide

Part Number: 53-1005648-04

59

Содержание RUCKUS ICX 7550














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды