23
4.5 CLOSING / SECURING CLOSURE
4.5.1 Apply optional routing label inside lid or on tray cover.
4.5.2 Install port plugs into all unused ports. See photo 68.
4.5.3 Close lid. Ensure all port plugs, including ground plug if no ground wire (if present) and cables are properly
aligned. Snap right side hinge, left side hinge, and then top hinge. Hinges can be closed
using
screwdriver
or
by hand.
See photos 69-71.
Large end of port plug
Caution:
Be sure
black braid or spiral
tubing is in place to
avoid pinching when
closing lid.
Photo # 68
Mini
-
OTE 300 Installation Guide
All
trademarks used in this publication are CommScope registered
201
9
CommScope Inc. All rights Reserv
ed
4
.5.4 Tighten security bolt. See photo 72.
Photo # 69
Close right side 1st
Photo #70
Close left side 2nd
Photo #71
Close top last
Photo # 72
Note:
Tighten the security bolt
with a torque limiting tool, like a
type 216C can wrench (shown)
or 25 in.-lbs. maximum
Note:
To
assist in
closing the
right side
latch, the
top can be
pressed
closed and
the security
screw can
be started to
hold the top
closed.
Then, the
right side
latch can be
closed.
