Comm Net Systems v30/30, Руководство по установке и эксплуатации

Страница: 17 / 30

V30/30 DISTRIBUTION PANEL
SETUP AND OPERATION MANUAL
OPERATION - PAGE 11
5.2 Home Screen
5.2.1 bus Load and Voltage Displayed Per bus
TAbLE 10. bUS STATUS MONITORED
BUS STATUS COLOR STATUS
Green Normal Operation
Orange Bus in Minor Alarm (Bus Overload Warning)
Red Bus in Major Alarm (Bus Overload and/or High or Low
Voltage)
5.2.2 Display Per breaker Status
Asterisks indicate that each channel has redundancy enabled (default) .
TAbLE 11. DISPLAY PER bREAKER STATUS
BREAKER STATUS COLOR STATUS
Gray Breaker not installed and if installed, breaker is OFF and
not inventoried
Green Normal operation and breaker is in inventory
Light Orange Breaker not inventoried but turned ON (no alarms
monitored)
Orange Breaker in minor alarm and only monitored for
inventoried breakers (breaker overload warning)
Red Breaker in major alarm and only monitored for
inventoried breakers (breaker overload or breaker trip)
5.2.3 Alarm Indication
If an alarm occurs, press the alarm icon at the top left of the screen to access
the System Alarms screen.
TAbLE 12. ALARM INDICATION
ALARM ICON COLOR STATUS
Red At least 1 major alarm has been detected
Orange At least 1 minor alarm and no major alarms
5.2.3.1 System Alarms
This screen displays the bus/module/breaker location of the alarm(s) and
alarm type(s) as well as the total number of alarms detected. Press the alarm
silencer icon at the top left of the screen to temporarily disable the audible
alarm.
TAbLE 13. ALARM STATUS
BACKGROUND COLOR STATUS
Red/White Gradient At least one major alarm has been detected
Orange/White Gradient At least one minor alarm has been detected, and no
major alarm
Figure 12. bus Status
Bus status
(background color)
Total bus
current
Bus voltage
Figure 13. breaker Status
Alarm
icon
Breaker
status
Figure 14. System Alarms
Alarm
silencer
Breaker
label
Redundancy
ON/OFF
Module Breaker
Bus
Total # of
alarms
present