Comm Net Systems v30/30, Руководство по установке и эксплуатации

Страница: 15 / 30

V30/30 DISTRIBUTION PANEL
SETUP AND OPERATION MANUAL
OPERATION - PAGE 9
Section 5: Operation
5.1 Overview
The V30/30 offers an advanced touch-screen display that allows real-time monitoring
of breakers and modules.
5.1.1 Firmware Features
TAbLE 5. bUS FEATURES
BUS FEATURES
DISPLAY - Displays voltage per bus
- Displays total load per bus
CALIBRATION - Voltage per Bus
- Load per bus
- Adjustable feeder fuse size (100-300A)
ALARMS - Adjustable overload alarm threshold per bus (40%-100%)
- Bus Overload
- Bus Overload Warning (-10% of alarm threshold)
- Over Voltage (greater than 56.0 V)
- Under Voltage (less than 47.0 V)
- Bus Redundancy
- Bus Redundancy Warning
TAbLE 6. bREAKER FEATURES
BREAKER FEATURES
DISPLAY - Display Ampacity per Breaker
- Display Load per Breaker
SETTINGS - Manual Offset Load per Breaker
- Set Breaker Ampacity (0-35A)
- Set Breaker Alarm Threshold (40%-100%)
ALARMS - Adjustable overload alarm threshold
per breaker (40%-100%)
- Breaker Overload
- Breaker Overload Warning (-10% of alarm threshold)
- Breaker Not Inventoried
- Breaker Redundancy
- Breaker Redundancy Warning
TAbLE 7. OTHER FEATURES
OTHER FEATURES
Bus and Module Auto
Inventory
- System automatically takes bus and module inventory
Display Brightness
Adjustment
- Allows user to change screen brightness
Clear Memory Options - Clear Voltage Calibration
- Clear Load Calibration (Bus and Breaker)
- Breaker alarm threshold
Test Modes - Test Major Alarm
- Breaker Isolation test
Raw Data - Voltage per Bus
- Load per Breaker
- Temperature Status per Breaker
Alarms - Silence buzzer
Configuration - Powered bus or installed module cannot be removed
from configuration
Module Overload and
warning alarms
- In alarms list, bus and module will be displayed for
module in overload