Comm Net Systems v30/30, Руководство по установке и эксплуатации

Страница: 20 / 30

V30/30 DISTRIBUTION PANEL
SETUP AND OPERATION MANUAL
PAGE 14 - OPERATION
5.6 Advanced
To access advanced settings from the home screen, press the Settings
icon, then press Advanced.
5.6.1 Raw Data
This screen displays raw data for load status, breaker status, and
temperature.
5.6.2 Configuration
This screen allows the removal of busses and modules from system
monitoring. Busses with at least 20V cannot be removed from configuration.
Modules and busses are automatically inventoried if data is being received
by the controller.
5.6.3 Test Modes
This screen allows the user to test the major alarm relay and onboard
audibble alarm. Exiting the menu will automatically turn off the relay.
Note: if a major alarm is present on the system, the major alarm test feature
will not operate.
5.6.4 Restore Defaults
This screen allows the user to restore:
y Bus calibration
y Load calibration
y Breaker ampacity
y
Brightness/buzzer
y Breaker inventory
y Breaker alarm threshold
Figure 25. Raw Data Figure 26. System Information
Figure 27. Test Modes Figure 28. Restore Defaults