Comm Net Systems v30/30, Руководство по установке и эксплуатации

Страница: 22 / 30

V30/30 DISTRIBUTION PANEL
SETUP AND OPERATION MANUAL
PAGE 16 - OPERATION
5.7.3 Admnistration
When accessing the web server for first time, it is necessary to configure the
adminstration settings. Click on the "Administration" tab to access these settings.
Notification Settings
Alert Email Settings
y Enable/disable breaker trip alerting
y Enable/disable threshold alerting
y
Enable SNMP trap notification, email notification or both
y Set email notifications per alert
y Set notification rate in minutes
Email and SNMP Settings
Configure SNMP Settings
y SNMP trap source address
y
SNMP trap destination address
y Configure email settings
y Configure SMTP server
y Enter user name email address and pasword
y
Enter email recipients
y Send test email message
Note: SMTP server must be configured on port 25.
Site Settings
Configure Site Settings
y Site name
y
Site location
Network Settings
Network Configuration Settings
y IP v4 settings
y IP v6 settings
Upload Firmware
Follow the instructions on this page to upgrade the firmware on your embedded
ethernet module.
Reboot Device
This page allows the user to reboot the embedded Ethernet module while not
disrupting normal operation of power equipment.