ComAp IG-NT, Руководство по установке

Страница: 53 / 149

IGS-NT Installation Guide
53
7.3.2. Terminals, Inputs and Outputs
Function Terminals Note
Generator voltage L1,L2,L3, (N) 3x120 / 277 Ph-N or 208 / 480 Ph-Ph VAC,
CAT III
(neutral not needed), max 350 / 600VAC *
Mains/Bus voltage L1,L2,L3, (N) 3x120 / 277 Ph-N or 208 / 480 Ph-Ph VAC
(neutral not needed), max 350 / 600VAC,
CAT III
Generator current L1k,L1l, L2k,L2l,
L3k,L3l 0 ÷ 5 Amps, max 7,5 A all time, 10 A for 30
sec
0 ÷ 1 Amps, max 1,5 A all time, 2 A for 30
sec
Neutral/Mains
current LNk,LNl 0 ÷ 5 Amps, max 7,5 A all time, 10 A for 30
sec
0 ÷ 1 Amps, max 1,5 A all time, 2 A for 30
sec
IG-AVRi interface AVRI-OUT, AVRI-
COM TTL (5V PWM) interface to IG-AVRi
Power supply + , - 8 ÷ 36 VDC
D+ D plus
Inputs and outputs
Binary inputs BI1 ÷ BI6
BI7 ÷ BI16
Activation to minus power supply.
Binary outputs BO1 ÷ BO6
BO7 ÷ BO16
Load is connected to plus power supply.
Analog inputs AI1 ÷ AI4 Ohms, mA, Volts sensors
Analog outputs SG-OUT, SG-COM
AOUT+, AOUT-
COM
Speed governor output interface (

10V / 5V
PWM; 500
– 3000Hz)
Configurable analog output, mA, V.
RPM RPM-IN, RPM-COM Min 2 Vpk-pk (from 4 Hz to 4 kHz)
Communication interface
RS232 (1) D SUB9 (male) PC: InteliMonitor, GenConfig or
Modem, GSM modem or
ECU (e.g. Cummins ModBus) or InteliVision
8
RS232 (2) D SUB9 (male) PC: InteliMonitor, GenConfig
or Modem, GSM modem or InteliVision 8