OWNERS MANUAL | Cobolt 06-01 Series | D0136-K DECEMBER 2018
201
51 | 52
Compliance (CDRH models only)
The CDRH model lasers (-100) are designed and manufactured to comply with the EC Low Voltage Directive and the
EC EMC Directive in the CDRH-compliant configuration of laser head, key control box, key and Cobolt-supplied power
supply. All equipment must be mounted on a common ground plane, such as an optical table. The equipment might
not conform to the EC directives if any part of the supplied equipment is replaced with a part not supplied by Cobolt
or if the equipment is not properly grounded. Disabling any of the safety features nullifies the CE marking and violates
the laser safety standard.
The following harmonized standards are in use:
Electrical Safety:
EN 61010-1, IEC-61010-1, UL 61010-1
Laser Safety/Class:
IEC-60825-1 , CDRH 21 CFR 1040.10 and 1040.11
EMC:
IEC 61326-1
EN55011 class A
EN61000-4-X, where X=2,3,4,5,6 and 11
FCC Part 15, subpart B, class A
All Cobolt products are RoHS compliant as defined by the EU Directive 2011/65/EU.
Contact you sales representative for a copy of the full Declaration of Conformity.
Disclaimer
Cobolt will assume no responsibility for damage incurred by faulty customer equipment, such as measurement
equipment, cables etc, used in conjunction with Cobolt lasers. Cobolt makes no warranty of any kind with regard to
the information contained in this guide, included but not limited to, implied warranties of merchantability and
suitability for a particular purpose. Cobolt shall not be liable for errors contained herein nor for incidental or
consequential damages from the furnishing of this information. No part in this manual may be copied, reproduced,
recorded, transmitted, or translated without the express written permission by Cobolt.
