OWNERS MANUAL | Cobolt 06-01 Series | D0136-K DECEMBER 2018
201
45 | 52
Clear Fault
-
is displayed in the event of a fault. The user can deal with the cause of the fault and then press “Clear
Fault” and then restart the laser by clicking “Laser ON”. Example: if the remote interlock loop is open the user must
make sure th
e loop is closed again before issuing a “Clear Fault” followed by “Laser On”.
More
–an additional Cobolt Monitor™ window will open containing more detailed information of that laser’s status.
06-MLD
Cobolt Monitor™ software expanded to for more
detailed monitoring.
TEC Settings
–
shows the running status and the fault status for the laser’s internal thermoelectric coolers (TEC).
Laser Operation Mode and Settings
- displays the set laser power. The user can switch between constant power
mode, constant current mode and modulation mode. Likewise, there are boxes to set the constant power level and
constant current level. In constant power mode the current will be set by Cobolt Monitor to reach the power level set
in the this field. When in modulation mode it is recommended to use an external power meter. See section 6 and 7 for
more details on continuous wave and modulation modes.
