Chapter 5: Configuration with web interface
98-169085-B
To control data connections from web interface
47
To control data connections from web interface
The startup page of the web interface is used to start and stop data connections and to set up
the data connections.
To start and stop data connections
By default, you must activate your data connection before you can access the Internet.
However, you can enable Automatic Context Activation, see
To start and stop data connections on your EXPLORER 323, do as follows:
1. In the opening page, locate the connection package you want to start.
2. Click
to start the connection. If more connections are included in the connection
package, this will start all included connections. The connections icon at the bottom of the
page shows
when a BGAN data connection package is running.
3. Click
to stop the connection.
If the connection fails, the connection tile shows an exclamation mark
erroralt
and an error
message. The error message is also shown in the data log, see
When a connection is active, the icon changes to
and the tile for the active connection
shows:
• IP address: The external IP address that has been assigned by the service provider to this
session. If the connection was started by remote SMS, the local IP address is also shown.
• Transferred data: For Standard data, the tile shows the total amount of transmitted and
received data since the connection was established.
• Connection duration: For Streaming data, the tile shows the total time the connection has
been active.
• Bit rate: For Streaming connections, the tile shows the fixed bit rate.
Note
Streaming data is not available with an M2M subscription.
Note
The icons for starting
and stopping
connections are only active if the terminal
is ready and registered on the BGAN network. Otherwise the text is grayed out and
you cannot start data connections.
If a connection is automatically activated (has ACA enabled), the icons for starting
and stopping are replaced by a lock symbol
?
.
Note
Once a Streaming connection is started, the connection will run until you stop it.
You will be charged for the time you are connected.
