Chapter 4: To use the EXPLORER 323
98-169085-B
To access the terminal from a remote location
37
To access the terminal from a remote location
Remote access with SMS
You can perform a number of actions and some configuration on the EXPLORER 323 using
SMS commands.
1. Prepare the terminal for SMS commands as described in
2.
Send an SMS
from a trusted phone number to the mobile number of the terminal. The
text in the SMS must start with the SMS command and follow the syntax for the SMS
commands. Note that the remote SMS password (default:
remote
) must be included with
every command.
The following SMS commands are supported.
For an explanation of syntax and parameters,
see
Remote access with the web interface
There are two methods of getting remote access to the web interface:
• Using the AT command _IREMWEB, e.g. sent in an SMS (ATCO command).
SMS command Function
ACTIVATE
Activates BGAN data connections for the device(s) connected to the
EXPLORER 323.
DEACTIVATE
Deactivates some or all the BGAN data connections for devices
connected to the EXPLORER 323.
CLEAR
Deletes SMS messages in the EXPLORER 323.
GETINFO
Gets information from the EXPLORER 323 such as call time, data usage,
GPS position and global IP address.
RESTART
Restarts the EXPLORER 323.
WATCHDOG
Gets or allows you to set the Connection watchdog parameters (Link
monitoring).
ADVWATCHDOG Gets or allows you to set the Terminal watchdog parameters.
ATCO
Allows you to send AT commands in an SMS to the EXPLORER 323 which
returns the response in an SMS.
Note:
The ATCO command only supports a subset of the AT commands,
see
ATCO commands
on page 98.
ADPWRST
Resets the EXPLORER 323 administrator password to
admin.
Note
When using remote access, the web interface may take a long time to load the pages,
because the Internet connection may be slow.
