List of events
98-144390-C
Appendix B: System messages
B-3
System messages
0810D-0
ADM ERROR
Antenna communication
Link to the ACU could not be established. Either
the ACU is malfunctioning, or - if the system
software has just been updated - the software
is too old and is not compatible with the ACU
hardware.
08800-0
ADM ERROR
Internal power supply
An internal power supply voltage is outside its
legal range.
08840-0
ADM WARNING Master PLL lock
The master PLL has lost lock. Check the input
reference signal.
08841-0
ADM ERROR
Tuner lock
The internal tuner PLL was unable to lock.
08842-0
ADM WARNING GSC demodulator
The GSC demodulator has reported an error.
08843-0
ADM WARNING DVBS demodulator
The DVBS demodulator cannot be initialised
and loaded correctly.
08844-0
ADM WARNING BUC voltage
The BUC voltage is out of range.
08845-0
ADM WARNING LNB voltage
The LNB voltage is out of range. The LNB might
be switched off to protect the power supply
circuitry. Reactivate satellite profile to try
again, check LNB cable and surroundings if the
problem persists.
08880-0
ADM ERROR
WLAN configuration error Configuration of WLAN module failed.
08A00-0
ADM WARNING GX Core Module fan
There is a problem with the Core Module fan.
Check/clean and replace if necessary.
08A01-0
ADM WARNING GX Core Module heater
There is a problem with the Core Module
heater. Check and replace if necessary.
08A02-0
ADM WARNING GX Core Module
temperature
The Core Module temperature is out of range.
It may affect performance, and it will be shut
down if the situation gets worse.
08A03-0
ADM ERROR
GX Core Module power
The Power Good signal from the Core Module
is low. Check cables.
08A04-0
ADM WARNING iDirect modem
The ACU detected a warning/error in the
iDirect modem. Log into the modem for more
information. Info:
0x00000001: Temperature error
0x00000002: Test error
0x00000004: Fan error
Error code
(ID)
Severity
Description
Explanation
Table B-1: Event messages (Continued)
