Setup with the web interface for PC
98-144390-C
Chapter 4: Setup and operation
4-13
Setup a
nd op
eration
2. For each item under
ALLOW USERS TO:
select
•
Yes
to give the guest user access to the settings.
•
No
to block the guest user access to the settings. Then the pages are read-only,
changes cannot be made by the guest user.
Change network
: Locks the page SETTINGS > Network. On this page IP configuration
of the LAN connectors can be changed. For further information see
Modify LNB data
: Locks the page SERVICE > LNB for guest users. This page is used
when exchanging an LNB.
Control Modem
: Locks the page SERVICE > Modem for guest users. This page is used
to reset or power cycle the GX modem.
3. Click
Apply
.
4.1.8
Import and export of a system configuration
The configuration file contains all the settings you have entered during system setup:
satellite profiles, VSAT modem profiles, LAN setup, user permissions etc. If you need to
reuse a configuration in another EXPLORER 3075GX, you can save the current configuration
to a file, which can then be loaded into another EXPLORER 3075GX. You can also use this
feature for backup purposes.
Figure 4-9: Web interface: ADMINISTRATION, User permissions
Important
You can only load and save configurations when the units have the same
software version.
Important
The configuration file contains the encryption key of the WLAN.
