Keypad and display menus
98-144390-C
Chapter 4: Setup and operation
4-19
Setup a
nd op
eration
Top-level menu
Menu descriptions
Top-level menu
Description
MANUAL POINTING Shows current azimuth, elevation and signal strength.
MAIN
View with current status of the EXPLORER 3075GX. Example when
logged on to the satellite:
This view is displayed after a time out of 10 minutes. Press any key
(except left arrow) to enter the menu at
MAIN
.
New events are shown in this display. If an event is displayed, press
OK
to jump directly to the menu
EVENTS
for viewing the currently
active events.
ANTENNA
Shows the current antenna parameters, position, software version
and serial numbers.
MODEM
Modem information, including modem LED status
SATELLITE
Current satellite information. This information is selected using the
web interface.
NETWORK
Shows the IP addresses and netmasks of the LAN connectors and
the management mask.
EVENTS
View system events. Active events are shown as: X ACTIVE EVENTS
in the
MAIN
display. Press
OK
to update the list.
Table 4-7: Top-level menus
MANUAL POINTING
Description
AZI ELE SIG
Current values for azimuth, elevation, signal strength indicator
Table 4-8: MANUAL POINTING menu
ANTENNA
Description
POINTING
ANTENNA STATE: Current state of the antenna, e.g. TRACKING
ELEVATION: Current elevation angle of the antenna
AZIMUTH: Current azimuth of the antenna, with reference to North
GPS
LATITUDE: current latitude, read from GNSS module.
LONGITUDE: current longitude, read from GNSS module.
FIX TYPE: 2D or 3D or NONE
VERSIONS
Current software version.
Table 4-9: ANTENNA menu
