Setup with the web interface for PC
98-144390-C
Chapter 4: Setup and operation
4-9
Setup a
nd op
eration
4.1.4
WLAN settings
On this page you can enable and set up the WLAN access point. Do as follows:
1. Select
SETTINGS > WLAN
from the left navigation pane.
2. Enable or disable the WLAN (default:
Disabled
).
3. Select the
Country
for your present location.
4.
WLAN channel
can be changed, channels available depend on the setting for
Country
.
5. For
Broadcast SSID,
select
Enabled
(default) or
Disabled.
Enabled: WLAN access point is shown to other users.
Disabled: WLAN access point is hidden.
6. Type in the
SSID
of your choice or accept the default SSID, which is
Cobham
. The
SSID is the name of the wireless local area network. It is a text with maximum 32
characters.
7. Select the
Security
standard. Select one of the following encryption standards:
• Disabled (default)
• WEP-64, enter the encryption key in hexadecimal format.
• WEP-128, enter the encryption key in hexadecimal format.
• WPA-PSK, enter the encryption key in hexadecimal or text format.
• WPA2-PSK, enter the encryption key in hexadecimal or text format.
8. Type in the
Encryption key
for the selected Security standard. This is not applicable if
you have selected
Security mode
None
.
9. Click
Apply
.
Figure 4-6: Web interface: SETTINGS > WLAN
