Coast Spas Purfikt Spa, Руководство пользователя

Страница: 34 / 38

OWNER’S MANUAL
PURFIKT SPA
2021
Miscellaneous Messages
Communications error
The control panel is not receiving communication from the
System. Call for Service.
Test software installed
The Control System is operating with test software.
Call for Service.
* Some messages an be reset from the panel.
Messages that can be reset will appear with a Clear Icon at the
bottom of the Message Screen. Press the Clear Icon text to
reset the message.
**M0XX is a Message Code.
Codes like this will be seen in the Fault Log
Reminder Messages
General maintenance helps
Reminder Messages can be suppressed by using the
Reminders Screen. Reminder Messages can be chosen
individually by the Manufacturer. They may be disabled entirely,
or there may be a limited number of reminders on a specific
model. The frequency of each reminder (i.e. 7 days) can be
specified by the Manufacturer.
Check the pH
May appear on a regular schedule, i.e. every 7 days. Check pH
with a test kit and adjust pH with the appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days. Check
sanitizer level and other water chemistry with a test kit and
adjust with the appropriate chemicals.
Clean the filter
May appear on a regular schedule, i.e. every 30 days. Clean the
filter media as instructed by the manufacturer.
Test the GFCI (or RCD)
May appear on a regular schedule, i.e. every 30 days. The GFCI
or RCD is an important safety device and must be tested on a
regular basis to verify its reliability. Every user should be trained
to safely test the GFCI or RCD associated with the hot tub
installation. A GFCI or RCD will have a TEST and RESET button
on it that allows a user to verify proper function.
Change the water
May appear on a regular schedule, i.e. every 90 days.
Change the water in the spa on regular basis to maintain
proper chemical balance and sanitary conditions.
Clean the cover
May appear on a regular schedule, i.e. every 180 days.
Covers should be cleaned and conditioned for max-imum life.
Treat the wood
May appear on a regular schedule, i.e. every 180 days.
Wood skirting and furniture should be cleaned and condi-tioned
per the manufacturers instructions for maximum life.
Change the filter
May appear on a regular schedule, i.e. every 365 days.
Filters should be replaced occasionally to maintain proper spa
function and sanitary conditions.
Change the UV
May appear on a regular schedule. Change the UV as
instructed by the manufacturer.
Check ozone
May appear on a regular schedule. Change the UV as
instructed by the manufacturer.
Service check-up
May appear on a regular schedule. Do a service check-up as
instructed by the manufacturer.
Additional messages may appear on specific systems. Reminder
messages can be reset from the panel. Messages that
can be reset will appear with a Clear Icon at the bottom of the
Message Screen. Press the Clear Icon text to reset the
message.
Warning! Qualified Technician Required for Service
and Installation.
3 4