Coast Spas Purfikt Spa, Руководство пользователя

Страница: 14 / 38

OWNER’S MANUAL
PURFIKT SPA
2021
14
to the acrylic surface and may induce an effect known
as “crazing”. Crazing is not covered under spa limited warranty.
STAINLESS STEEL CONTROLS AND
COMPONENTS ABOVE THE WATERLINE
To preserve the stainless steel finish of the controls
and components above the water line, we recommend they
be wiped with a dry soft cloth after each use of your spa.
In addition, off-gas your spa by removing the cover
for approximately 30 minutes multiple times per week (if
not in use) and after every shock treatment.
CABINET CARE
Never spray cabinets with a high-pressure garden
hose or pressure washer for any reason. This action
may induce an electrical short in the spa’s electrical
equipment.
CEDAR CABINET
Our cedar cabinets are made from top quality
Western Cedar and manufactured and stained at our
factory. With proper care and maintenance, your cedar
cabinet should maintain its beauty for many years.
Manufacturer recommends touch-up or re-staining of the
cabinet every three to four years depending on your
environment. Contact
your Dealer for re-staining
procedures.
VINYL CABINET
Vinyl cabinets are made of a rigid polymer that
combines the durability of plastic with the beauty of real
wood. This cabinet is manufactured so that it won’t crack,
peel, blister or delaminate even after prolonged exposure to
the elements. We recommend wiping the cabinet with
a soft damp cloth (or sponge) using household soap or
liquid detergent and rinsing with fresh water thoroughly.
DO NOT use abrasive cleansers or material as this
may damage the surface.
SLATE CABINETS
Optional Slate cabinets are custom-built and painted
in our factory. We recommend lightly brushing the cabinet
with a SOFT bristle brush to remove any dirt or stains.
For more information on the care of your Slate
cabinet, please contact your Local Dealer.
COVER CARE
A well cared for spa cover is a thing of beauty in its own
right. Be sure to clean and condition your cover at least
once a month (more often if needed).
WEATHERSHEILD COVER MAINTAINANCE PROCEDURE
Weather-shield is a solution dyed polyester fabric designed to be
flexible and easy for manufacturers to use. Its urethane coating
enhances the stability of the weave and allows for greater water
resistance, while also minimizing shrinkage and stretching.
Weather-shield features a high UV, water and mold and mildew
resistance and has excellent tear and abrasion resistance.
CARE & CLEANING
Weather Shield is designed to be easy to maintain. It can be
washed, or brushed off and rinsed. Proper care and cleaning is
important to the life of all fabrics.
FOR NORMAL CARE AND CLEANING
• Add 2 ounces of mild soap such as Woolite or Dawn dish-
washing liquid to 1 gallon of lukewarm water.
• Clean the fabric with a "soft bristle brush."
• Rinse thoroughly with cold water and air dry.
FOR STUBBORN STAINS
•
Add maximum 1 cup of bleach to one 1 gallon of water.
•
Spray on lightly to the fabric face (non-coated side). Do not
soak fabric.
•
Prolonged exposure to harsh chemicals can damage the
coating.
•
Rinse immediately. Do not leave on for more than 2
minutes.
Cleaning with harsh cleaners such as bleach will require a
re-treatment like 303 High Tech Fabric Guard for restoring
water
repellency.
All waterfalls and laminar flow water features should be turned
off when the spa is not in use to avoid heat and water loss.
BASIC INSTALLATION AND CONFIGURATION
GUIDELINES
WARNING! Qualified Technicians Required for Service
and Installation
ELECTRICAL REQUIREMENTS
All self contained spas use 120VAC or 240VAC electrical spa
packs. These instructions describe the only acceptable electrical
wiring procedures. Spas wired in any other way will void your
warranty and may result in serious injury. All installations should
be completed by a certified electrician. Failure to comply with state
and local codes may result in fire or personal injury and will be the
sole responsibility of the spa owner.