Coast Spas Purfikt Spa, Руководство пользователя

Страница: 30 / 38

Locking/Unlocking
The same steps are used to Lock and Unlock.
To lock either Settings or Panel first select Settings (if it says
“Unlocked”) or Panel (if it says “Unlocked”), than press the word
“Lock“ for at least 5 seconds. To unlock either Settings or Panel
first select Settings (if it says “Locked”) or Panel (if it says
“Locked”), than press the word “Lock“ for at least 5 seconds.
Panel Locked and Settings Unlocked
Press here for 5 seconds to lock or unlock
OWNER’S MANUAL
PURFIKT SPA
2021
Hold - M037*
Hold Mode is used to disable the pumps during service
functions like cleaning or replacing the filter. Hold Mode will
last for 1 hour unless the mode is exited manually. If spa
service will require more than an hour, it may be best to
simply shut down power to the spa.
The Hold Icon on the Settings Screen places the spa
in Hold Mode and displays the System Hold screen.
Touch Back to exit Hold Mode.
Drain Mode
Some spas have a special feature that allows Pump 1 to be
employed when draining the water. When available, this
feature is a component of Hold Mode.
*M0XX is a Message Code.
Codes like this will be seen in the Fault Log
Utilities
The Utilities Icon on the Settings Screen takes you
to the Utilities Screen. The Utilities Screen contains
the following:
Panel
Touching the Panel Icon on the Utilities Screen takes you to the
Panel Screen, where you can set how long it takes the panel to go
to sleep after the last activity. The Sleep Timer can be set from 1
minute to 60 minutes. The default is 30 minutes.
Demo Mode
Demo Mode is not always enabled, so it may not appear. This is
designed to operate several devices in a sequence in order to
demonstrate the various features of a particular hot tub.
Fault Log
The Fault Log is a record of the last 24 faults that can be reviewed
by a service tech. Use the Up and Down buttons to view each of
the Faults. When Priming Mode shows in the Fault Log, it is not a
fault. Rather, it is used to keep track of spa restarts.
Utilities Screen
30