CoachComm Tempest NG Sideline, Руководство пользователя

Страница: 50 / 64

Tempest NG User Manual v1.2013 45
Components
Consult with a CoachComm technician before making changes to any of the Tech Menu settings!
Radio Config
- provides a snapshot of certain radio settings such as the Network Number and Lockout Key; these settings
are assigned by the BaseStation to each BeltPack during the pairing process. These settings cannot be changed at the
BeltPack. If a change is required, the BaseStation must be changed and then all corresponding BeltPacks be “re-paired” to it
for the updated settings. These should only be changed with the guidance of a CoachComm technician.
Security -
each wireless BaseStation and corresponding BeltPacks should have matching security codes.
Diagnostics
- provides a snapshot of BeltPack information such as radio version and firmware.
Set Defaults
- allows a user to reset diffferent types of system defaults and settings strictly related to the BeltPack.
Base Slot
- each BeltPack must have its own “slot assignment” for the BaseStation to which it is paired. Slots 01 - 05.
Mode Setting
- There are two operating modes that a BeltPack can operate - Normal and Shared Mode. In Normal Mode,
a BeltPack has full-time listen and talk capabilities. When a BeltPack is in Shared Mode, it has full-time listen capabilities but
operates in a momentary talk mode. Only one Shared BeltPack can utilize the talk path at any given time. If the talk path is in
use by another BeltPack, the user that presses TALK will get a busy signal.
All Shared BeltPacks register with the fifth slot of the corresponding BaseStation, while the first four slots occupy BeltPacks
operating in Normal Mode. Shared BeltPacks will not display on the BaseStation status screen. Note: The BaseStation must
be set to Shared Mode as well.
Delete Base
- This feature allows you to remove BaseStations that the BeltPack has been paired up with.