CoachComm Tempest NG Sideline, Руководство пользователя

Страница: 25 / 64

20
Components
Tempest NG BaseStation Rear Panel
1.
A/C Power Inlet
— Power input from standard wall current or from the UPS or system power.
2.
2 Wire Intercom ‘Loop Through’ for Channels 1-4
— Male and female 15 pin ‘D sub’ connector to provide input and
output to ‘Daisy Chain’ multiple units together. Intercom channels are supplied by connection from the WIM-8 to the WAM-
10 and then to the first BaseStation in the system. The first BaseStation loops to the second, and the second loops to the
third.
3.
2 Wire Intercom ‘Loop Through’ for Channels 5-8
— Male and female 15 pin ‘D sub’ connector to provide input and
output to ‘Daisy Chain’ multiple units together. Intercom channels are supplied by connection from the WIM-8 to the WAM-
10 and then to the first BaseStation in the system. The first BaseStation loops to the second, and the second loops to the
third.
4. Player Announce Output — Male XLR connector provides audio output when the BaseStation is configured to do so.
Typically triggered by a button on one or multiple BeltPacks.
5.
Aux In and Out
— Aux In is not available in the Tempest NG system; Aux Out can be enabled within the Wired Intercom
Settings menu. This enables selected audio to be routed out of the Tempest NG system and into a recording device or other
listening device. Note: This only routes audio from the Tempest NG wireless, not the audio from the wired system.
6.
Base Sync In and Out
— Used to sync multiple BaseStations for greater RF range and performance. Note: Do NOT sync
a 2.4 GHz model with a 900 MHz model. This will cause severe wireless performance issues.
7.
Relay Connector
- Future functionality will provide for triggers for external add-on equipment.
8. Transceiver Connector - Used to connect the BaseStation to a remote transceiver to be mounted atop the antenna system
pole. Each BaseStation must have it’s own transceiver.
1 2 8 7 6 5 4 3