manualshive.com logo in svg

CoachComm Tempest NG Sideline, Руководство пользователя

Поделиться
Скачать
CoachComm Tempest NG Sideline Скачать руководство пользователя страница 38

Tempest NG User Manual v1.2013 

        

33

 

Components

Call Alert

 - Call is a non-audible signal transmitted along an intercom channel.  Depending on the gear involved, the call 

can be interpreted by a user, by lights, tones, or in the case of the Tempest BeltPack, as a vibration.  This screen allows the 
user to determine the action taken by the BeltPack when a call is received.  Audible will create a tone in the connected 
headset, Vibrate will cause the BeltPack to vibrate when a call is received, or Both can be selected. 

Call Button

 - The user may enable or disable the button that initiates a call from this BeltPack to other users on that intercom 

channel.  If disabled, the user of that BeltPack cannot initiate a call to anyone, but may be able to receive call signals 
depending on the settings in “Call Function” above.

Select Relay

 – Select the unique relay to be activated with the BeltPack.

Relay Button

 – Select the button that will activate the unique relay.  The primary function of the button may need to be 

disabled.

Содержание Tempest NG Sideline

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды