CoachComm Tempest NG Sideline, Руководство пользователя

Страница: 34 / 64

Tempest NG User Manual v1.2013 29
Components
Player Announce
– The Player Announce function in the Tempest NG BaseStation is used to send a wireless BeltPack
microphone signal to a dedicated external audio output. When the wireless user presses the Player button on the BeltPack,
their audio is re-routed from the selected intercom channel(s) and is sent to the BaseStation rear panel Player connector. In
addition, a relay closure contact is available on the RELAY connector on the back of the BaseStation. Pressing the Player
button enables the headset microphone regardless of the status of the Talk buttons. If enabled, all BeltPacks can access this
feature, but only one user at a time.
The Player Announce output connector is an XLR-3M. It is balanced and transformer isolated and outputs nominal line level
audio from -4 to +8 dBu. The Player Announce connector output level can be adjusted at the Player Announce screen.
In addition, the Player button may be configured to also control an additional relay unique to the users BeltPack. See the
GPO Relay section for more details.
Mic Kill Settings
- The Mic Kill button disables all wireless mics (enabled TALK buttons) on a system when the button is
pressed. This feature is capable of being fully enabled, or completely disabled.
Call Settings
- The Call feature allows a user to send a tone or vibration to other users on the same channel as a way to get
their attention. The Call function can be set to fully enabled, completely disabled, or set to only send signals to the internal
wireless or wired portions of the system.