manualshive.com logo in svg

CoachComm Tempest NG Sideline, Руководство пользователя

Поделиться
Скачать
CoachComm Tempest NG Sideline Скачать руководство пользователя страница 61

 

TNG:56

 

 

 

 

 

 

 

 

 

           

Appendix

Appendix B 

Tempest NG Specifications

System 

 

RF Frequency ............................................................................................2400 to 2483.5 MHz

RF Scheme ................................................................................................FHSS with TDMA

Effective Radiated Power

 ..........................................................................100 mW (using 2dBi antenna)

Receiver Sensitivity

 ...................................................................................-90 dBm for 10^(-5) BER

Radio Certification

 ....................................................................................FCC Part 15.247, ETS 300.328, Canadian RSS-210, license free

Transmission Range ..................................................................................

1000’ under ideal conditions (500 ft - 900 ft typical)

Audio Dynamic Range ..............................................................................

>94 dB

Audio Frequency Response ......................................................................300 Hz – 3.8 kHz with proprietary audio voice shaping

System Latency .........................................................................................Less than 60ms direct

BaseStation

Intercom Audio Channels .........................................................................8

Full Duplex BeltPacks per BaseStation

 ......................................................5

Single Duplex, Shared BeltPacks per BaseStation

 .....................................Unlimited

Antenna Connector Type ..........................................................................N/A

Number of Synchronized BaseStations

.....................................................10 

BaseStation / BeltPack Pairing

 ..................................................................Via supplied Mini jack/cable

Programming Port  ...................................................................................USB 

Player Announce and BeltPack GPO Closures ..........................................6 relays via DA-15

2-Wire Intercom Interface   ......................................................................Two DA-15s with loop through 

2-Wire Compatibility

 ................................................................................

Telex® AudioCom® compatible

Aux Input ..................................................................................................N/A

Aux Output ...............................................................................................N/A 

Player Announce Output  .........................................................................XLR-3M, n4 dB bal, variable, transformer isolated

Front-Panel Headset .................................................................................4-pin male connector, 4-channel access

Microphone Type  ....................................................................................Dynamic or Electret, auto-selected

Front-Panel LCD Display ............................................................................

240 x 64 resolution 32 level grayscale

Dimensions  ..............................................................................................2-RU unit, 3.5 x 19.0 x 12 inches  

Weight ......................................................................................................12.85 lbs

AC Power Input .........................................................................................85–260 VAC at 50–60 Hertz  

Operating Environment

 ............................................................................-20 to 50 C, 10% to 90% Humidity

BeltPack

Intercom Audio Channels  ........................................................................3

Headset Connector ...................................................................................4-pin male

Microphone  .............................................................................................Dynamic or Electret, auto-selected

LCD Display  ..............................................................................................102 x 80 pixels

Antenna ....................................................................................................In2dBi patch

Charger .....................................................................................................input 100-240V, 0.3A, 50-60Hz output  5V, 2.0A

Battery Charging 

 ......................................................................................Via charger supplied or USB port

Battery Life, Rechargeable Lithium Polymer………

 ....................................Approximately 9 hours 

Charge time for Lithium-Polymer battery

 .................................................2.5 hours from empty

Optional Power

 .........................................................................................3 Standard AA alkaline cells, 

Battery Life, Alkaline batteries

 ..................................................................Approximately 3.5 Hours

Dimensions (inches) ………………….

 ............................................................6.1 h x 4.0 w x 1.75 d 

Weight (with Lithium Polymer battery)

 ....................................................15.2 oz

Operating Environment

 ............................................................................-20 to 50 C  10% to 90% Humidity

Содержание Tempest NG Sideline

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды