CoachComm Tempest NG Sideline, Руководство пользователя

Страница: 16 / 64

Tempest NG User Manual v1.2013 11
Components
WIM 8(RD) Wired Interface Module
1. LCD
2. User “soft buttons”, function indicated on LCD
3. Ringdown instrument connections
4. Flexible Combine Modules — FCM (2)
5. Monitor Port
6. Test Enable Switch
7. Connections to local PS 4001 power supply(s)
8. Remote trigger for Combine Circuits
9. Dry pair connections, RJ-14s
10. Connections to WAM 10
11. Power entry for Ringdown Circuits (RD version only)
12. Dry pair connections, Spring Jacks
The WIM 8 (Wired Interface Module, 8 line) and WIM 8(RD) (ring down) are very similar. The WIM 8(RD) is the same as the WIM
8 but with the addition of integrated generators used for the ringdown circuits. Typically each NG system will have one WIM 8
(pressbox) and one WIM 8(RD) (sideline). The WIM 8(RD) provides the interface between the stadium wiring and the system. That
interface is available via spring jacks or RJ-14s (4 wire RJ). The spring jacks are used for those instances when a user needs to
attach to bare stadium wire. The RJ-14s are the preferred method since they provide plug and play connectivity.
In addition to connecting to the stadium wiring, the WIM 8(RD) connects to the WAM 10 and the AudioCom® power supplies. The
WIM 8(RD) also provides for connections for the local ringdown phone instrument, two flexible isolate/combine circuits and a
monitoring port. During run mode, the LCD will display line status and during test mode, the LCD will show line faults detected.
Front
Back
1
2 3
4
12
11 10
9 8
7
6
5