2
eVenue Tempo
S a f e t y I n f o r m a t i o n
7. Never tow on slopes greater than 10 degrees, or on any excessively steep slope.
8. Never operate on wet or slippery slopes. Reduced traction could result in tipping over your tow vehicle and/or the eVenue
system.
9. Never park the tow vehicle or eVenue system on a steep grade or slope.
10. Do not turn on a slope as you may tip over your vehicle and/or the eVenue system.
11. Note the following tow vehicle restrictions:
A. If your tow vehicle will not travel by itself over the terrain by which you plan to tow eVenue, then it is not a suitable
tow vehicle over that terrain. If this situation occurs, the terrain may not be suitable for eVenue to traverse either. Be
cautious and find a different route to prevent equipment damage and a potential voiding of the eVenue warranty.
B. We recommend a few types of tow vehicles for eVenue. The tow vehicle may be either two- or four-wheel drive.
i. Golf cart or other electric towing vehicle
ii. Utility Vehicle
iii. Compact or Sub-Compact Tractor
Note:
Do not attempt to tow the ePod when not in Travel Ready position.
Mechanical Safety
1. Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts of eVenue. Modifications to your
system could cause personal injuries and property damage and will void your warranty.
2. The system fan area should be kept clear to allow for proper ventilation. Do not place near a wall or cover the system
while in operation.
3. Only use attachments/accessories/cables/hardware provided by
the manufacturer.
4. Do not use blocks to increase height of system.
5. Never move an ePod or Control Unit unless the Travel Ready
indicator is green and the Upper Speaker Array is in its cradle.
6. Never deploy an ePod’s or Control Unit’s Upper Speaker Array
unless the unit is stable, centered, and level, and the Pitch and
Roll Level indicators are green. The Deploy Ready LED must be
green for deployment.
7. Raise and lower the Upper Speaker Array arm from a safe
distance and within view of the Motion Control System’s Status
Panel. During deployment, be aware of all pinch points and crush
hazards; keep hands and feet clear of these areas.
8. The system brake is designed for stabilizing the ePod and
Control Unit during deployment of the Upper Speaker Array. It is
not to be used to control speed when the unit is being moved.
Figure 1: This warning label is attached to each ePod and alerts users of
specific pinch hazards.
