7
eVenue Tempo
S e t u p a n d T e a r d o w n P r o c e d u r e s
Setup and Teardown Procedures
The following is a step-by-step process to set up and tear down the eVenue Tempo Control Unit and ePods. The diagrams show the
use of three ePods (plus the Control Unit), but these procedures can be followed to incorporate the use of more to meet your needs.
Included is a legend to identify the images used throughout these steps.
1. Pull the ePod(s) (including the ePod with the Control Unit mounted to it) and additional time clocks (optional) to the desired
location(s) in the venue.
Note:
Speaker positioning is determined
by sound coverage expectations
and specifications. For more
information, see the “Sound
Coverage Overview” on page 16
of this manual.
2. Run the power cables for each eVenue product. To connect the Tempo Control Unit to the ePod it is mounted on, use its
bundled power and audio cables. Ensure the Control Unit is plugged into the Power and Audio Input receptacles. (The
Power Input is located under the audio reel shelf, and the Audio Input is located next to the power reel.)
Legend
ePod
ePod & Control Unit
ePod Audio
Cable (On Reel)
120 V
15 A
60 Hz
Front
Figure 7: Position your ePods for best sound coverage for your venue.
Figure 8: Plug all eVenue power cables into outlets.
