CNC Seig X2, Руководство по сборке

Страница: 16 / 35

At this point, you are ready to start re-assembling the machine with the conversion kit. There is no definite way
to re-assemble so you can start where ever you choose. But for the instructions, we will do the Y axis cross slide
to the base first.
Note: If your machine has a lifting device mounted to the left side of the headstock, it must be removed. There
is no instruction for this as there are only two screws/nuts that must be removed. However, be aware that this
is spring loaded and may uncoil when removing. Please use caution!!
This is the lifting device that may or may not be
On your machine.
It is no longer needed and